TASKI Sani 4 in 1 Plus – acidic washroom cleaner, descaler and disinfectant (5L)

TASKI Sani 4 in 1 Plus is an acidic product that cleans, descales, disinfects and freshens all acid-resistant washroom surfaces in a single step. One product replaces four, reducing the number of products needed in the washroom.

It is effective against a broad spectrum of microorganisms, including E. coli, salmonella and influenza viruses, significantly reducing the risk of cross-contamination. It works reliably across a wide range of water hardness, and the patented odour neutralisation technology (O.N.T.) leaves a pleasant, fresh fragrance.

Dosage: the product is used exclusively with the Diversey dosing system, which ensures full cost control and safe working. The recommended concentration is 2 % (FIDI standard) or 3 % (medical standard). The dosing system has a high-flow outlet for filling buckets and a low-flow outlet for filling spray bottles.

Spray method: fill the bottle from the low-flow outlet, fit the trigger sprayer and shake gently. Apply the solution to a damp cloth and wipe the surface, allow the contact time given in the microbiological data, and remove stubborn deposits with a sponge pad. Rinse or change the cloth regularly.

Bucket method: fill the bucket from the high-flow outlet using the filling gun. Apply the solution with a cloth, sponge or mop, wipe the surface, then allow the contact time given in the microbiological data.

Microbiological data (FIDI standard, recommended concentration 2 %): EN 1276 bactericidal — 1.50 %; EN 13697 bactericidal — 2.00 % / 5 min / dirty conditions.

Microbiological data (medical standard, recommended concentration 3 %): EN 13727 bactericidal — 1.75 % / 5 min / dirty conditions; EN 13697 bactericidal — 2.00 % / 5 min / dirty conditions; EN 13624 yeasts — 3.00 % / 15 min / dirty conditions; EN 13697 yeasts — 2.25 % / 5 min / dirty conditions; EN 14476 enveloped viruses — 1.00 % / 1 min / clean and dirty conditions; prEN 16777 enveloped viruses — 1.00 % / 5 min / clean conditions and 1.50 % / 5 min / dirty conditions.

Limitations: do not mix with other products. Do not use on water- or acid-sensitive surfaces. Wet grout joints thoroughly with water before use. Test material compatibility first on a small, inconspicuous area.

Key benefits:

• • Cleans, descales, disinfects and freshens in one step
• • Reduces the number of products needed in the washroom
• • Effective against a broad spectrum of microorganisms, including E. coli, salmonella and influenza viruses
• • Excellent cleaning across a wide range of water hardness
• • Reduces the risk of cross-contamination
• • Patented odour neutralisation technology (O.N.T.) and a pleasant, fresh fragrance

Technical data:

Dosing equipment:

Documentation: