TASKI Jontec No1 – no-rinse finish stripper (5L)

TASKI Jontec No1 is a strongly alkaline stripper for effective removal of floor polishes and layers of maintenance products from alkali-resistant hard floors.

Unlike conventional strippers, its formulation leaves the floor ready for a new coating without rinsing, cutting stripping time by up to 50%. With high wetting and emulsifying power, it dissolves even the thickest build-up. At high concentration no scrubbing is needed — a mop and bucket are enough, without a machine.

Dosage: bucket — 12.5%, i.e. 1.25 L per 10 L of water; maximum 25%.

Application: dose the product into a full machine tank or bucket of water. Apply the solution and do not allow it to dry. Leave for 5–10 minutes, then scrub with a single-disc machine fitted with a suitable pad (at high concentration, scrubbing is not necessary). Pick up the dirty solution with a wet vacuum cleaner, wipe the floor with a damp mop to remove residues and allow it to dry completely before applying a new coat.

Hard-to-reach places: use a concentration of up to 25% with a mop and bucket, leave for 10 minutes and pick up the slurry with a wet vacuum cleaner. No scrubbing is required.

Limitations: use cold water only. Rinse porous and textured floors thoroughly. Do not use on alkali-sensitive floors, e.g. linoleum, cork and wood, or on solvent-sensitive floors, e.g. asphalt. Remove splashes of solution on alkali-sensitive surfaces (wooden skirting boards, painted and lacquered surfaces) immediately with a damp cloth. Before use, test material compatibility on a small, inconspicuous area. For professional users only.

Key benefits:

• • No rinsing — the floor is immediately ready for a new coat
• • Cuts stripping time by up to 50% compared with ordinary strippers
• • Quickly and effectively removes floor emulsions from alkali-resistant floors
• • Dissolves even the thickest build-up and removes stubborn dirt
• • At high concentration no scrubbing is needed — a mop and bucket are enough
• • High wetting and emulsifying power

Technical data:

Documentation: