TASKI Jontec Matt & Care – mat emulzija za zaštitu podova (5L)

TASKI Jontec Matt & Care is a matt floor finish for protecting most smooth, water-resistant hard floors. Its matt appearance avoids the visual impression of a slippery floor, making it suitable wherever glossy floors look unsafe.

It leaves a hard, durable protective film with a satin appearance and excellent adhesion to most floor types. Good resistance to alcohol and disinfectants makes it suitable for healthcare facilities. Slip resistance meets the international standard ASTM D-2047 (minimum 0.6).

Dosage: ready to use; do not dilute. Consumption: 20–30 ml/m² per coat.

Application: apply only to floors that have been stripped of old finish, thoroughly rinsed and allowed to dry completely. Pre-treat porous and damaged floors with a Diversey sealer. Pour the product sparingly onto the floor and spread it evenly in overlapping strips 1–1.5 m wide, keeping a wet edge. Allow each coat to dry completely before applying the next. Apply two coats to smooth, non-porous floors; three coats are usually sufficient for porous floors. Linoleum: once the first coat is dry, level the floor with a single-disc machine and a blue pad, wipe over with a damp mop and allow to dry completely before applying further coats.

Restoring the finish: remove one coat of finish with a Diversey top-scrub stripper and pick up the dirty solution with a machine or wet vacuum cleaner. Allow to dry completely, then apply a new coat.

Limitations: do not dilute or mix with other products. Do not use on textured plastic (cushioned vinyl), unsealed wood or cork. Seek advice before use on profiled or studded rubber floors. Do not use outdoors or in wet areas. For professional users only.

Key benefits:

• Matt, satin protective finish — no visually slippery look
• Hard, durable protection resistant to wear and scuff marks
• Excellent adhesion to most floors: vinyl, synthetics, linoleum, stone, lacquered wood and cork
• Resistant to alcohol and disinfectants — suitable for healthcare facilities
• Slip resistance according to ASTM D-2047 (minimum 0.6)
• Spreads evenly and is easy to renew
• No intentionally added fluorinated levelling agents (PFAS)

Technical data:

Product code	9292282
Pack size	2 x 5 L
Brand	TASKI (Diversey)
Product type	Ready-to-use matt-finish polymer emulsion for floor protection
Appearance	Milky white liquid
Fragrance	Product-specific
pH	≈ 9 (concentrate)
Relative density	≈ 1.02 (20 °C)
Dosage	Ready to use; consumption 20–30 ml/m² per coat
Application	Protection of smooth, water-resistant hard floors: vinyl, synthetics, linoleum, stone, lacquered wood and cork
Safe on	Most smooth, water-resistant hard floors
Not for use on	Textured plastic (cushioned vinyl), unsealed wood and cork; do not use outdoors or in wet areas
Note	Slip resistance of at least 0.6 according to ASTM D-2047. Do not dilute or mix with other products
Storage	In the original sealed packaging, protected from extreme temperatures