TASKI Jontec OmniStrip – stripper for deep cleaning using the spray method (2x5L)

TASKI Jontec OmniStrip is a top stripper for deep cleaning and removing the top layer of floor finish by the spray method with a single-disc machine. It removes the top layer of polish damaged by foot traffic and fits perfectly into the TASKI Omni system as a simple deep cleaning and refinishing programme.

It is particularly suitable for water-sensitive floors and for areas that cannot be closed to traffic, as only a small amount is applied and it dries very quickly.

Directions: pour the product into a hand sprayer or the spray unit of a single-disc machine. Apply sparingly to the floor to avoid splashing and work the surface immediately with a blue pad. When the pad starts to smear, turn it over or replace it with a clean one. Repeat until the desired result is achieved, then apply a new coat of finish or spray-clean the surface with a suitable product and pad for a uniform appearance. The product is ready to use — do not dilute.

Note: do not prepare the solution in advance for later use. Soak soiled pads overnight in a 2% stripper solution, then rinse thoroughly and dry. The surfactants in the product are biodegradable in accordance with EC Directives 73/404/EEC and 73/405/EEC. For professional use only.

Key benefits:

• • Effectively removes damaged layers of polish from all coated surfaces with a suitable pad
• • Specially formulated for thorough cleaning using the spray method
• • Suitable for water-sensitive floors and areas that cannot be closed off
• • Removes even stubborn dirt deposits and care product residues
• • Dries very quickly, so the area remains in use

Technical data:

Recommended machine:

Documentation: