TASKI Jontec Repel & Care – impregnator for stone and ceramic floors (5L)

TASKI Jontec Repel & Care is a water-based impregnator that penetrates and protects untreated porous natural stone and ceramics, indoors and outdoors.

It forms a dirt-repellent protective layer, making daily cleaning easier and extending the intervals between periodic maintenance. The treatment is invisible — it does not change the appearance or colour of the stone — and slows down staining from liquid spills.

Dosage: ready to use — do not dilute. Consumption depends on the porosity of the floor and can vary considerably, typically 10–40 ml/m² per application, i.e. 25–100 m² per litre. Test the floor's porosity with water beforehand to estimate consumption.

Application: treat only thoroughly cleaned, dry floors. Shake well before use. Working in sections of 2–3 m², apply the product evenly with a clean mop, applicator or single-disc machine (below 200 rpm) with a red pad, so that the surface is completely wet. Keep it wet for 3–5 minutes and do not let it dry (add more product if necessary). Remove any excess. If required, repeat the treatment after 1–3 hours, once the surface is touch-dry.

Note on excess product: on dark polished surfaces, excess product may leave a visible white film. If so, remove the excess with a clean dry cloth or squeegee. If the floor has already dried, spray with water and buff with a dry cloth or a single-disc machine (below 200 rpm) with a red pad, keeping the machine moving at all times. The floor may be slippery until the excess has been removed and it is completely dry; once dry, the treatment does not affect the floor's slip resistance.

Limitations: do not mix with chlorine products. Test material compatibility first on a small, inconspicuous area. For professional use only.

Key benefits:

  • • Penetrates the surface and forms a dirt-repellent protective layer
  • • Makes cleaning easier and extends the intervals between periodic maintenance
  • • Invisible — does not change the appearance or colour of the stone
  • • Slows down staining from liquid spills
  • • Water-based, neutral fragrance, easy to apply
  • • For indoor and outdoor use
  • • No intentionally added fluorinated levelling agents (PFAS)

Technical data:

Product code9300510
Pack size2 x 5 L
BrandTASKI (Diversey)
Product typeReady-to-use, water-based impregnator for stone and ceramics
AppearanceMilky to clear liquid
FragranceNeutral
pH≈ 4 (concentrate)
Relative density≈ 1.00 (20 °C)
Concentration (dosage)Ready to use; consumption 10–40 ml/m² (25–100 m² per litre), depending on porosity
ApplicationProtection of untreated porous natural stone and ceramic surfaces, indoors and outdoors
Safe onUntreated porous natural stone and ceramics
NoteDo not mix with chlorine products. Test material compatibility first on an inconspicuous area
StorageIn the original sealed packaging, protected from extreme temperatures

Documentation:

Technical data sheet (PDF)Safety data sheet (PDF)
SKU 9300510
Category Building care
Tags
building care floor care hard floors ready to use

Contact us







    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.