TASKI Jontec Satin & Care – satin-gloss protective floor finish (5 L)

TASKI Jontec Satin & Care is a floor finish that gives most smooth, water-resistant hard floors a silky, moderate gloss. Its technology ensures exceptional adhesion to most floor coverings and high resistance to scuff marks and dirt in high-traffic areas.

The protective film is hard, durable and wear-resistant, and is easy to restore, which reduces maintenance costs. Slip resistance meets the international standard ASTM D-2047 (minimum 0.7).

Dosage: ready to use; do not dilute. Consumption: 20–30 ml/m² per coat.

Application: apply only to floors that have been stripped of old finish, thoroughly rinsed and allowed to dry completely. Pre-treat porous and damaged floors with a Diversey base coat. Pour the product sparingly onto the floor and spread it evenly in overlapping strips 1–1.5 m wide, keeping a wet edge. Allow to dry completely, then buff with a single-disc machine before applying the next coat. Apply the second and any further coats in the same way, buffing after each coat, including the last.

Restoring the finish: remove one coat of finish with a Diversey surface stripper and pick up the dirty solution with a machine or wet vacuum cleaner. Allow to dry completely before applying new coats.

Limitations: do not dilute or mix with other products. Do not use on textured plastic (cushioned vinyl), unsealed wood or cork. Seek advice before use on profiled or studded rubber floors. Do not use outdoors or in wet areas. For professional users only.

Key benefits:

• • Silky, moderate sheen that enhances the natural look of the floor
• • Hard, durable, wear-resistant protection
• • High resistance to scuff marks and dirt, even under heavy traffic
• • Excellent adhesion to vinyl, synthetics, linoleum, stone, varnished wood and cork
• • Slip resistance according to ASTM D-2047 (minimum 0.7)
• • Spreads evenly and is easy to renew
• • No intentionally added fluorinated levelling agents (PFAS)

Technical data:

Documentation: